Blog

Feb 24, 2025

U.S. Steel Industry Files New Trade Case Against Imports of Corrosion Resistant Steel From 10 Countries | News & Events | Clark Hill PLC

The Petition The U.S. Steel industry, including Steel Dynamics, Inc., Nucor Corporation, United States Steel Corporation (“U.S. Steel”), Wheeling-Nippon Steel, Inc., and the United Steel, Paper and

The Petition

The U.S. Steel industry, including Steel Dynamics, Inc., Nucor Corporation, United States Steel Corporation (“U.S. Steel”), Wheeling-Nippon Steel, Inc., and the United Steel, Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial and Service Workers International Union, AFL-CIO, CLC (the “USW”) (collectively “Petitioners”), asks the U.S. government to impose new antidumping and countervailing duties on imports of certain corrosion-resistant steel products (“CORE”) from 10 countries. As a result, imports of CORE from Australia, Brazil, Canada, Mexico, the Netherlands, South Africa, Taiwan, Turkey, the United Arab Emirates (the “UAE”), and Vietnam may become subject to antidumping duties (“AD”). Imports of CORE from Brazil, Canada, Mexico, and Vietnam may also become subject to additional countervailing duties (”CVD”).

The CORE covered by these petitions includes certain flat-rolled steel products, either clad, plated, or coated with corrosion-resistant metals such as zinc, aluminum, or zinc-, aluminum-, nickel- or iron-based alloys, whether or not corrugated or painted, varnished, laminated, or coated with plastics or other non-metallic substances in addition to the metallic coating. The covered products include coils that have a width of 12.7 mm or greater, regardless of the form of the coil (e.g., in successively superimposed layers, spirally oscillating, etc.). Please see below for the full text of the proposed scope for the investigations.

Key Facts

Petitioners: Steel Dynamics, Inc., Nucor Corporation, U.S. Steel, Wheeling-Nippon Steel, Inc., and the USW.

Foreign Producers/Exporters and U.S. Importers: Please contact Clark Hill’s international trade team for a listing of individual importers and exporters named in the petitions.

AD/CVD margins: Petitioners alleged the following AD and CVD margins:

The Investigation

The Department of Commerce (“DOC”) and the U.S. International Trade Commission (“ITC”) will conduct the investigations. The ITC will determine if there is a reasonable indication that the imports are injuring or threatening to injure the U.S. industry. The DOC will determine whether imports are being dumped or unfairly subsidized and will calculate corresponding AD and CVD duty margins that importers will need to pay on their entries.

Importers will be required to deposit the calculated AD/CVD duties on their imports as of the date that the DOC publishes an affirmative preliminary determination. In this case, the DOC’s preliminary determinations are currently expected by Nov. 29, 2024 (CVD) and Feb. 12, 2025 (AD). Importers should be aware that entries may be subject to cash deposits before these dates if the DOC finds that there is a surge of imports after the petition was filed.

Next Steps

All U.S. importers and foreign producers are advised to prepare as soon as possible due to the strict statutory deadlines in these cases. If this product is of interest to you, please contact Clark Hill’s international trade team so that we can provide you with additional information.

A schedule of approximate key dates is attached below.

The Scope

The proposed scope of these investigations describes the subject merchandise as:

The products covered are certain flat-rolled steel products, either clad, plated, or coated with corrosion-resistant metals such as zinc, aluminum, or zinc-, aluminum-, nickel- or iron-based alloys, whether or not corrugated or painted, varnished, laminated, or coated with plastics or other non-metallic substances in addition to the metallic coating. The products covered include coils that have a width of 12.7 mm or greater, regardless of the form of the coil (e.g., in successively superimposed layers, spirally oscillating, etc.). The products covered also include products not in coils (e.g., in straight lengths) of a thickness less than 4.75 mm and a width that is 12.7 mm or greater and that measures at least 10 times the thickness. The products covered also include products not in coils (e.g., in straight lengths) of a thickness of 4.75 mm or more and a width exceeding 150 mm and measuring at least twice the thickness. The products described above may be rectangular, square, circular, or other shapes and include products of either rectangular or non-rectangular cross-section where such cross-section is achieved subsequent to the rolling process, i.e., products which have been ‘‘worked after rolling’’ (e.g., products which have been beveled or rounded at the edges).

All products that meet the written physical description are within the scope of these investigations unless specifically excluded. The following products are outside of and/or specifically excluded from the scope of these investigations:

Also excluded from the scope of the antidumping duty investigation on corrosion-resistant steel from Taiwan are any products covered by the existing antidumping duty order on corrosion-resistant steel from Taiwan. See Certain Corrosion-Resistant Steel Products From India, Italy, the People’s Republic of China, the Republic of Korea and Taiwan: Amended Final Affirmative Antidumping Determination for India and Taiwan, and Antidumping Duty Orders, 81 Fed. Reg. 48,390 (Dep’t Commerce July 25, 2016).

CORE subject to the order are typically classified in the Harmonized Tariff Schedule of the United States (HTSUS) at subheading 7210.30.0030; 7210.30.0060, 7210.41.0000. COREs subject to the order may also enter under HTSUS subheading 8703.90.0100. CORE that are subject to the order typically enter under HTSUS subheadings 7210.90.1000, 7215.90.1000. The HTSUS subheadings are provided for convenience and customs purposes only, and the written description of the merchandise subject to the order is dispositive.

* All deadlines are approximate and may change throughout the course of an investigation. Contact Clark Hill for current updates and details.

** Indicates a deadline that currently falls on a weekend or Federal holiday, which will be extended to the next business day.

Contact Clark Hill

If you have any questions regarding the content of this alert, please contact Mark Ludwikowski ([email protected]; 202-640-6680), Kevin Williams ([email protected]; 312-985-5907), Aristeo Lopez ([email protected]; 202-552-2366), Kelsey Christensen ([email protected]; 202-640-6670), Sally Alghazali ([email protected]; 202-572-8676), or other members of Clark Hill’s International Trade Business Unit.

This publication is intended for general informational purposes only and does not constitute legal advice or a solicitation to provide legal services. The information in this publication is not intended to create, and receipt of it does not constitute, a lawyer-client relationship. Readers should not act upon this information without seeking professional legal counsel. The views and opinions expressed herein represent those of the individual author only and are not necessarily the views of Clark Hill PLC. Although we attempt to ensure that postings on our website are complete, accurate, and up to date, we assume no responsibility for their completeness, accuracy, or timeliness.

Clark Hill’s labor and employment lawyers invite you to a complimentary two-part virtual program designed to provide key insights into federal and California labor and employment laws for private and public sector employers in 2025.

As of January 1, 2025, Washington State’s new Toxic-Free Cosmetics Act (TFCA) restricts nine chemicals and chemical classes from being used in cosmetic products made, distributed, or sold within the state. This law applies to all businesses that manufacture, distribute, sell, or use cosmetic products in Washington, including national retail chains to individually owned salons that provide cosmetology services.

2024 has been a pivotal year for artificial intelligence, marked by the passage of state AI legislation, the introduction of privacy regulations targeting automated decision-making and profiling, and an uptick in lawsuits challenging businesses’ use of AI tools. This webinar will provide a comprehensive review of the evolving AI landscape, summarizing key enacted laws, exploring emerging legal challenges, and offering actionable strategies for businesses deploying AI technologies.